Keeping the warehouse honest
Receipts and deliveries move stock in and out. Internal transfers, scrap, and cycle counts keep the stock accurate in between. These are the housekeeping operations that prevent a small discrepancy from becoming a month-end problem.
This module is short but important. A warehouse that only records receipts and deliveries will drift. A warehouse that counts and corrects will stay trustworthy. The goal is a simple routine the team can sustain.
Count a little, often. A small cycle count every week is easier than a full physical inventory every quarter. Odoo supports both. Start with a simple routine and keep it consistent.
Learning objectives
By the end of this module, you should be able to:
- Perform an internal transfer between two warehouse locations.
- Scrap damaged or expired stock and explain the stock impact.
- Run a cycle count and apply an adjustment for a discrepancy.
- Read a basic stock valuation report.
- Explain why these operations should not replace normal receipts and deliveries.
Core concepts
Internal transfers
An internal transfer moves stock from one location to another inside the same warehouse. It does not change the total on-hand quantity; it changes where the stock sits. Use it for putaway, replenishment, or staging.
Scrap
Scrap removes damaged, expired, or unusable stock from the sellable inventory. Odoo records the scrap in a scrap location and reduces the on-hand quantity. Scrap is not a sale and not a return. It is a loss, and it should be recorded with a reason.
Cycle counts
A cycle count is a partial physical count. You count a product or a location, compare the count with the system quantity, and apply an adjustment if they differ. It is faster than a full inventory and easier to schedule. The adjustment posts the difference to an inventory account.
| Operation | Stock effect | When to use it |
|---|---|---|
| Internal transfer | No change to total on-hand; changes the location. | Putaway, staging, replenishment. |
| Scrap | Reduces on-hand quantity. | Damage, expiry, unusable stock. |
| Cycle count adjustment | Changes on-hand to match the physical count. | Physical count discrepancies. |
Stock valuation
Stock valuation assigns a value to the inventory. The method depends on the product category and the company configuration, such as standard cost, average cost, or FIFO. The warehouse team does not need to be accounting experts, but they should understand that every receipt, delivery, scrap, and adjustment can affect the inventory value.
Do not use scrap or adjustments to fix a process problem. If stock is consistently wrong, find the cause: an unvalidated receipt, a wrong delivery quantity, or a missed transfer. Scrap and adjustments correct the symptom, not the cause.
Walkthrough
Follow along in the sandbox. Use the practice products and locations from Module 9.
-
Create an internal transfer
Open the Inventory app and go to Operations > Internal Transfers. Create a transfer. Set the source location and the destination location. Add a product and a quantity. Validate the transfer. Confirm that the stock moved from the source to the destination and that the total on-hand quantity did not change.
-
Scrap one unit
Go to Operations > Scrap. Create a scrap record. Choose the product, the quantity, and the source location. Add a reason, for example Practice damage. Validate the scrap. Open the product and confirm that the on-hand quantity decreased by one unit.
-
Run a cycle count
Go to Operations > Physical Inventory. Filter by the product or the location you want to count. Enter the counted quantity. If it differs from the system quantity, apply the adjustment. Confirm that the on-hand quantity now matches the count.
-
Review the stock valuation report
Go to Reporting > Valuation. Review the inventory value for the products you touched. Note that the scrap and the adjustment can change the value. The exact valuation method depends on the product category and the company configuration.
-
Review the audit trail
Open the product's stock moves or the operation history. Confirm that the internal transfer, the scrap, and the adjustment are recorded as separate documents. This is the trail the bookkeeper and the auditor will rely on.
Exercise
Transfer, scrap, and count
Complete these steps on your own in the sandbox.
- Create an internal transfer for one product between two locations and validate it.
- Confirm that the total on-hand quantity did not change.
- Scrap one unit of the product with a clear reason and validate it.
- Confirm that the on-hand quantity decreased by one unit.
- Run a cycle count for the product and apply an adjustment if the count differs.
- Review the stock valuation report and the stock moves for the product.
Expected result: the transfer, the scrap, and the adjustment are separate, auditable documents. The stock quantity matches the physical reality, and the valuation report reflects the changes.
Check your understanding
Answer these questions before moving to the next module. Open each answer to check yourself.
1. What does an internal transfer change?
It changes the location of the stock, not the total on-hand quantity. The stock moves from one location to another inside the same warehouse.
2. When should you scrap stock?
When the stock is damaged, expired, or otherwise unusable. Scrap reduces the on-hand quantity and records the loss with a reason.
3. What is a cycle count?
A partial physical count of a product or a location. You compare the count with the system quantity and apply an adjustment if they differ.
4. Why should you not use scrap or adjustments to fix a process problem?
They correct the symptom, not the cause. If stock is consistently wrong, find the unvalidated receipt, wrong delivery, or missed transfer. Fix the process so the problem does not recur.
5. Why does the warehouse team need to understand stock valuation?
Every receipt, delivery, scrap, and adjustment can affect the inventory value. The warehouse team does not need to be accounting experts, but they should understand that their operations have a financial impact.
Facilitator notes
Suggested timing: 10 minutes concepts, 20 minutes guided walkthrough, 25 minutes exercise, 5 minutes questions and close. Keep it practical and routine.
- Before the session, confirm that the sandbox has at least two locations and one storable product with stock.
- Have the warehouse manager describe the company's real cycle-count routine. If there is no routine, propose a simple weekly count.
- Watch for learners who use scrap to correct a receipt mistake. Redirect them to the correct document or the adjustment process.
- Keep the valuation discussion brief. The goal is awareness, not accounting training.
- Do not let learners scrap real-looking inventory without a clear practice reason. Use a practice product.
Next steps
You can now keep the warehouse accurate between receipts and shipments. The next phase moves to basic accounting, starting with the chart of accounts and journals.