Phase 4 · Module M10

Receiving: Inbound Shipments

Odoo 20.0 Training Program · Sage Business Vision migration

90 minutes Warehouse Manager Shippers Prerequisites: M9

Goods in, stock up

Receiving is where the purchase order meets the physical warehouse. The receipt records what actually arrived. Validate it, and Odoo increases the stock. Get the quantity or the lot wrong, and every downstream number is wrong.

The shippers own this process. The warehouse manager owns the exceptions. The bookkeeper depends on the receipt because it drives the vendor bill. This module is the daily receiving routine, from the expected quantity to the validated receipt.

Receive what arrived, not what was ordered. The purchase order is the expectation. The receipt is the reality. If they differ, record the reality and create a backorder for the rest.

Learning objectives

By the end of this module, you should be able to:

  • Open a receipt from a purchase order and read the expected quantities.
  • Receive a full or partial shipment and validate the receipt.
  • Register lot or serial numbers when the product requires them.
  • Create a backorder for the undelivered quantity.
  • Confirm that stock increased in the correct location.
  • Explain how to handle a damaged, short, or wrong-item shipment.
Audience: warehouse manager, shippers Format: demo + hands-on Sandbox: required

Core concepts

The receipt document

A receipt is generated from a confirmed purchase order. It lists the products and the expected quantities. It has a source location, usually the vendor, and a destination location, usually the warehouse input or stock. Validating the receipt is the act that increases stock.

Expected, received, and backorder

Quantity What it means
Expected The quantity on the purchase order. It is what the vendor promised.
Received The quantity that actually arrived and was counted. This is what you enter.
Backorder The difference between expected and received. It stays open so the rest can arrive later.

Lot and serial registration

If the product is tracked by lot or serial number, you must register the identifier during receipt. Odoo may ask for the lot or serial in a detailed operations screen. Scan or type the identifier, assign the quantity, and validate. Without the identifier, Odoo cannot trace the stock.

Putaway

Putaway is the step that moves received goods from the input location to their storage location. If putaway rules are configured, Odoo suggests the destination. If not, the receiver chooses the destination manually. The goal is to know where the stock actually sits.

Exceptions

  • Short shipment: receive what arrived and create a backorder. Notify purchasing so the vendor can be followed up.
  • Damaged goods: receive the good units, and handle the damaged units according to company policy, often by refusing them or scrapping them after receipt.
  • Wrong item: do not validate it into sellable stock. Notify purchasing and the warehouse manager. The return or correction process depends on the vendor agreement.

Do not validate a receipt as a shortcut. The receipt is the stock record. If the count is wrong, the stock is wrong. If the lot is wrong, the traceability is wrong. Take the extra minute to count and register correctly.

Walkthrough

Follow along in the sandbox. Use a confirmed purchase order from Module 6 or a demo receipt.

  1. Open the receipt

    Open the Inventory app and go to Operations > Receipts. Open a receipt that is ready or waiting. You can also open it from the purchase order. Review the product lines and the expected quantities.

  2. Count the goods

    Compare the physical goods with the expected quantities. Enter the received quantity for each line. If the full quantity arrived, the received quantity equals the expected quantity. If not, enter only what arrived.

  3. Register lot or serial numbers if required

    If the product is tracked, open the detailed operations or the lot/serial field. Enter the lot or serial number and assign the quantity. If the product is not tracked, skip this step. Do not invent lot numbers.

  4. Choose the destination location

    Confirm the destination location. If putaway rules are configured, Odoo may suggest a location. If not, choose the correct storage location. The stock should land where the team can find it later.

  5. Validate the receipt

    Click Validate. If the received quantity is less than the expected quantity, Odoo asks whether to create a backorder. Choose yes if the rest is still expected. Choose no only if the order is complete or cancelled.

  6. Confirm the stock impact

    Open the product and check the on-hand quantity. The stock should have increased by the received quantity in the correct location. Open the stock report and confirm the location and the quantity.

  7. Review the backorder

    If you created a backorder, open it. Confirm that it shows the remaining quantity and that it is linked to the same purchase order. The backorder is the open commitment for the rest of the shipment.

Exercise

Receive a partial shipment

Complete these steps on your own in the sandbox.

  • Open a receipt from a confirmed purchase order with at least one storable product line.
  • Receive less than the expected quantity on one line.
  • If the product is tracked, register a lot or serial number.
  • Choose the correct destination location.
  • Validate the receipt and create a backorder.
  • Confirm that the on-hand stock increased by the received quantity.
  • Open the backorder and confirm the remaining quantity.

Expected result: the receipt is validated, the stock is in the correct location, and the backorder shows the remaining quantity. The purchase order shows that the receipt is partially done.

Check your understanding

Answer these questions before moving to the next module. Open each answer to check yourself.

1. What is the difference between the expected and received quantities?

Expected is the quantity on the purchase order. Received is the quantity that actually arrived and was counted. You enter the received quantity.

2. What happens if you validate a receipt with less than the expected quantity?

Odoo asks whether to create a backorder. If you choose yes, the remaining quantity stays open and linked to the purchase order.

3. Why must you register lot or serial numbers when the product is tracked?

Without the identifier, Odoo cannot trace the stock. Lot or serial tracking depends on recording the identifier at receipt and delivery.

4. What is putaway?

Putaway is the step that moves received goods from the input location to their storage location. It ensures the stock is in the place where the team expects to find it.

5. What should you do with a wrong item that arrives?

Do not validate it into sellable stock. Notify purchasing and the warehouse manager. The correction or return depends on the vendor agreement and company policy.

Facilitator notes

Suggested timing: 15 minutes concepts, 25 minutes guided walkthrough, 40 minutes exercise, 10 minutes questions and close. The shippers should perform the exercise, not just watch.

  • Before the session, confirm that at least one receipt is ready to validate and that the product is storable.
  • If lot or serial tracking is not used by the company, demonstrate it briefly and focus the exercise on the quantity and location.
  • Prepare a partial shipment scenario so learners see the backorder.
  • Watch for receipts validated with the wrong destination location. That is a common source of "lost" stock.
  • Have the warehouse manager explain the physical putaway process and how it maps to the Odoo locations.

Next steps

You can now receive a shipment and record it accurately. The next module covers the outbound side: picking, packing, and shipping a customer delivery.